Skip to content

Howard adds setbacks to sand mine ordinance

By LeAnn R. Ralph

TOWN OF HOWARD — New sand mines in the Town of Howard east of Colfax will have to be located at least 800 feet from a residence.

The Howard Town Board approved a number of revisions to the township’s nonmetallic mine operator’s licensing ordinance at the April 15 meeting, including the setback provision.

Prior to the most recent revision of the ordinance, there were no setbacks for sand mines.

The revisions also added requirements for measuring the base flow of streams, preventing stormwater run-off, sentinel wells to protect groundwater, and controls for waste material being returned to mine sites.

The revision added language to include dry-processing facilities and facilities for the loading and unloading of sand to and from trucks.

According to the revised version of the mine operator’s licensing ordinance, the ordinance applies to a mine site or site “from which mineral aggregates or nonmetallic minerals will be extracted for sale or use by the owner, including all lands on which is or will be located any structures, equipment, storage facilities, stockpiles, washing or screening facilities, dry-processing facilities, facilities for the loading and unloading of sand to and from trucks, private roads or haulage ways associated with the nonmetallic mining operation.”

The ordinance also applies to “all contiguous lands to the non metallic mining operation under common ownership or control of the owner or operator.”

Setbacks

According to the revised ordinance, the 800-foot setback from a residence is a minimum from the edge of the property boundary on which the mining operation or industrial frac sand facility is located.

In other words, it is not the mine site itself, or the wet or dry processing facility, stockpiles, loading facilities or private haul roads that must be 800 feet from a residence. It is the property boundary where mining activities are located that must be 800 feet from a residence.

Here’s an example. Say that your house is located 300 feet from the road, and 400 acres across the road have been leased for a sand mine. The sand mine would not be able to operate on the 400 acres because the property boundary is less than 800 feet away from your house. Unless, of course, as a homeowner, you are willing to sign off to allow the nonmetallic mining operation.

The ordinance revision also includes a 15-foot setback from the outside edge of a roadside ditch, and, where necessary, along the property lines of adjoining landowners.

The 15-foot area must be planted with vegetation to minimize sediment from the mining operation running into the ditch or onto neighboring land. Any berms that are required cannot be located in the 15-foot setback.

The 15-foot setback area can be used by equipment for repair or maintenance of the berm or to remove run-off sediment deposited in the setback area.

The 15-foot setback would be in addition to any buffer area required by Chippewa County in a conditional use permit or a reclamation plan.

Water

The revision to the mine operator’s license ordinance includes a provision to protect streams.

If the groundwater flow is in the direction of a stream, the applicant must supply data that establishes the base-line flow of the stream at the time of applying for the license.

The revision includes a provision, too, for sentinel wells to monitor the groundwater at the extraction site.

The sentinel wells will monitor the depth to the groundwater, the groundwater gradient, and groundwater quality.

Quarterly samples will be tested for chemicals used in the mining operation, as well as for lead, arsenic, iron, iron bacteria and turbidity, and for nitrates and other contaminants associated with any activity other than mining that continues to be operated on the property where the mine is located or on land adjacent to the mining operation.

In addition, the ordinance revision requires that all private wells within a quarter mile of the down-gradient direction of the groundwater flow be tested for the same contaminants every third year of operation.

If the sentinel well shows contamination of the groundwater supply that may be due to the mining operation and no private wells exist within a quarter mile, private wells must be tested within a half mile of the down gradient of the sentinel well.

The town board can also request that wells up to a half a mile from the mine site be sampled at any time and the results of the sample will be provided to the township and to the well owner or owners.

The ordinance also was revised to include language to prevent surface water run-off  from entering the mine site when the mine site is adjacent to land being used for agricultural, commercial or residential purposes. The previous version of the ordinance referred to “control” of surface water run-off.

Waste materials

The revised mine operator’s licensing ordinance also added a section about control of waste materials.

According to the revision, the amount of waste material returned to a mine site cannot exceed the site-specific ratio of waste to target material.

“A processing facility shall keep records of the tonnage of raw material drawn from each raw material source. The tonnage of waste byproduct that is returned to each mine reclamation site shall not exceed the tonnage of waste contained in the raw material received at the processing facility from that site.”

For more information, the nonmetallic mine operator’s licensing ordinance (Chapter 17) and the revisions to Chapter 17 are available on the Town of Howard’s website at www.chip-howard-wi.org.