DC PR&D recommends rezone from ag to R1 to avoid “mixed zoning”
PROTECTED CONTENT
If you’re a current subscriber, log in below. If you would like to subscribe, please click the subscribe tab above.
Username and Password Help
Please enter your email and we will send you a password reset link.
By LeAnn R. Ralph
MENOMONIE — The Dunn County Planning, Resources and Development Committee has recommended a rezone from General Agriculture to Residential-1 for a property in the Town of Tainter to avoid mixed zoning.
Christine Oest of 580th Street, Colfax, explained during a public hearing before the PR&D committee January 25 that she was asking for the rezone from agriculture to R-1 so she could sell a little over six acres in the Tainter Woods Estates to an adjoining landowner.
Another adjoining landowner is interested in purchasing the remaining approximately four acres of the 10-acre parcel, but the zoning can remain as agricultural since the adjoining parcel is already zoned as General Agriculture, she said.
Tainter Woods Estates is east of the Tainter Town Hall, which is located on county Highway D north of Jake’s Supper Club and the Pioneer Grill and Saloon.
The Town of Tainter Plan Commission and the Tainter Town Board have approved the rezone, said Ann Wodarczyk, Dunn County zoning administrator.
No developments or improvements are proposed for the parcel that would be zoned R-1, and the acreage is expected to remain as forest land, she said.
The rezone is necessary to allow conveyance of the parcels to adjoining properties, she said.
Steve Kemp, 580th Street, Colfax, said he was concerned the rezone to R-1 would allow additional development of the property and said that he would like to see it remain as woods.
The intent for the rezone to R-1 is so the property can be sold to an adjoining landowner, Wodarczyk said.
Oest said she is hoping to be able to put a deed restriction on the six acres so that it remains as woodland.
Tom Carlson, Dunn County surveyor, said that under the county’s new land division ordinance, the six-acre parcel could be subdivided four times in five years by certified survey map.
Under the R-1 zoning, the landowner could divide the property into four one-acre parcels in five years by CSM until the landowner “runs out of real estate,” he said.
The site, however, does not lend itself very well to being subdivided, Carlson said.
Technically, because the parcel is six acres, it could be divided into six lots, but the need for access easements would only allow four lots, he said.
Kemp asked if a road would be able to go through the rezoned property.
A private road could be built to the property, but there could not be a road through the property because of the adjoining properties, Carlson said.
A road could be built to town standards, and then the landowner could ask the Town of Tainter to take over the road as a town road, he said, adding that a road could be built there now without a rezone.
Gary Bjork, county board supervisor from Colfax and a member of the PR&D committee, asked why the six-acre parcel could not remain as agricultural zoning, with the remainder of the property as R-1.
“That’s the problem. It’s a zoning issue,” Carlson said.
If the General Agriculture parcel remains as ag and is combined with the R-1 parcel, then it results in mixed zoning, and according to Dunn County’s zoning code, mixed zoning is not allowed on newly-created parcels, he said.
If the landowner did not want to combine the agriculture parcel with the R-1 parcel, then the acreage could be designated an outlot, and the landowner would receive two separate tax bills, Carlson said.
Oest pointed out that the Tainter Plan Commission and the Tainter Town Board would not approve an outlot because there would be no access to it.
The Dunn County Planning, Resources and Development Committee unanimously approved recommending that the Dunn County Board approve the rezone from General Agriculture to Residential-1 for the parcel in the Tainter Woods Estates.

